Features

• High gas removal feature
  Various filter combinations are possible, for a wide range of applications including acidic, alkaline and organic gases. Most organic solvent gases generated from construction materials for buildings, and resinous industrial and architectural coatings can be removed depending on the filter combination that is selected. Alkaline compounds such as ammonia are generated indoors as well as acidic gases such as NO3- and SO4-, all of which can be removed.
• Low priced and low-pressure loss
  These are priced lower than some filter media. They also contribute to energy conservation due to the low-pressure loss. They are very economic to use, since the type corresponding to the loading of various gases and the most suitable thickness can be selected.

Structure

Filter media are selected and combined, depending upon the various use conditions such as, the concentration of target gases, wind volume, use environment, etc.

Product Model Example

CLA-AK30H113FN7/FB-W1

Uses

• These filters can be used as a temporary chemical filter for target pollutant gas that is removed after proceeding operations.
• Other usages include an installation in FFU in the systems overhead duct-work.

Specifications, etc. may be revised without notice, for the purpose of product improvement. If you are subject to legislation, please note that flammable materials are included. Do not use these filters at locations where condensation occurs or where water is in the environment. Please contact our representatives for specific designs and uses.

Related link

• CleanSorbII CM
• CleanSorbII CAW·CH
• PureFoam
• PureMold
• PureACT